Bolt Cutter 600mm

Features

• 600 mm overall length — long handles deliver excellent mechanical advantage.
• Hardened cutting jaws — engineered for clean shearing on specified materials.
• Adjustable jaws — fine-tune blade gap to maintain cut quality as tools wear.
• Sturdy steel handles with non-slip grips for control and comfort.
• Bolt-through pivots for strength and serviceability.

Benefits

• High leverage, less effort: Long arms multiply force for easier cuts.
• Clean results: Properly adjusted blades reduce crushing and burrs.
• Versatile: Suitable for cutting chain, padlock shackles (within capacity), rebar ends, threaded rod and fencing wire.
• Durable investment: Serviceable pivots and adjustable blades help extend tool life.

Extra Information

• Cutting capacity depends on material hardness. As a guide for 600 mm class cutters: up to ~10 mm mild steel rod, smaller diameters for harder alloys. Always confirm on a test off-cut.
• For the best results, set the blade clearance so the jaws just “kiss” at the tip when closed.
• Store dry and apply a light oil to the pivots and blades to prevent corrosion.

Specifications

Safety

• Wear eye protection when cutting—fragments can eject at speed.
• Secure the workpiece and maintain a firm stance; keep bystanders clear of the cut line.
• Do not exceed rated capacity; overloading may chip blades or cause tool failure.
• Inspect blades and pivots before use; damaged parts must be serviced or replaced.