Search
Search Criteria
Products meeting the search criteria
Brand: AIRCRAFT
Model: AT0012-31
AirCraft Internal Sleeve For AT0012 Reversible Air Drill (AT0012-31)
At a Glance: Replacement internal splined sleeve that supports drive alignment and stable engagement within the AT0012 drill assembly.
When an air drill starts feeling loose, “notchy”, or inconsistent under load, it’s often a sig..
R 132.00
Ex VAT:R 114.78
Brand: TORK CRAFT
Model: TCIM90004
Tork Craft Impact Adaptor — ½″ Female × 1″ Male (Ball-Type)
Drive Conversion: ½″ (12.7 mm) Female → 1″ (25.4 mm) Male
The Tork Craft ball-type impact adaptor (Cat No. TCIM90004) enables a ½″ drive impact tool to operate with 1″ drive sockets, expanding the tool’s versatility when larger fasteners ..
R 300.00
Ex VAT:R 260.87
Brand: TORK CRAFT
Model: TCIM90002
Tork Craft Impact Adaptor — ½″ Female × ¾″ Male (Ball Type)
Drive Conversion: ½″ (12.7 mm) Female → ¾″ (19.05 mm) Male
This Tork Craft ball-type impact adaptor (Cat No. TCIM90002) enables you to use ¾″ drive sockets with a ½″ drive impact tool, offering flexibility in mixed‐drive workshops. Built ..
R 212.00
Ex VAT:R 184.35
Brand: TORK CRAFT
Model: TCIM90001
Tork Craft Impact Adaptor — ½″ Female × ⅜″ Male (Ball Type) – Cat No. TCIM90001
Drive Conversion: ½″ (12.7 mm) Female → ⅜″ (9.5 mm) Male
This Tork Craft ball-type impact adaptor allows you to use ⅜″ drive sockets with your ½″ drive impact wrench. Built for heavy duty use, the adaptor features robu..
R 109.00
Ex VAT:R 94.78
Brand: AIRCRAFT
Model: SG PP10-2
AirCraft 10 Litre Automatic Mix Paint Pot Only (SG PP10-2)
At a Glance: 10L pressure-fed paint pot with automatic mixing—keeps coatings consistent for smoother spray delivery (pot only).
When you’re spraying larger jobs, consistency is everything. The AirCraft SG PP10-2 10 Litre Automatic Mix ..
R 8,000.00
Ex VAT:R 6,956.52
Brand: AIRCRAFT
Model: SG PP10
Paint pot 10 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer's data sheet.
The pot is fitted with a manual mix..
R 6,156.00
Ex VAT:R 5,353.04
Brand: TORK CRAFT
Model: MM10
Tie on polishing wool buff
Diameter: Ø250mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff i..
R 330.00
Ex VAT:R 286.96
Out Of Stock
Brand: TORK CRAFT
Model: TCIM91005
TorkCraft - Drive impact Extension Bar
Size: 1/2 Inch
Width 10 Inch
Application:
The Tork Craft Impact extension bar is used to gain access to fasteners in locations that would otherwise be difficult to reach, full chamfer at drive opening for easy engagement with drive tools
..
R 286.00
Ex VAT:R 248.70
Brand: TORK CRAFT
Model: TCIM92005
Tork Craft Impact Extension Bar — 10″ × 3/4″ Drive
Extension Size: 10″ (250 mm) Length — 3/4″ (19.05 mm) Drive
The Tork Craft 10″ Impact Extension Bar with a ¾″ drive delivers extended reach and dependable strength for high-torque applications where standard tools cannot access. Buil..
R 739.00
Ex VAT:R 642.61
Brand: TORK CRAFT
Model: TCDP20100
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #100
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tor..
R 264.00
Ex VAT:R 229.57
