Search
Search Criteria
Products meeting the search criteria
Brand: TORK CRAFT
Model: TCAC0001
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,169.00
Ex VAT:R 1,016.52
Brand: TORK CRAFT
Model: TCAC0002
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive f....
R 1,334.00
Ex VAT:R 1,160.00
Brand: TORK CRAFT
Model: TCAC0004
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 35.00
Ex VAT:R 30.43
Brand: TORK CRAFT
Model: TCAC0005
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 45.00
Ex VAT:R 39.13
Out Of Stock
Brand: TORK CRAFT
Model: TCAC0005-01
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 55 mm (Model TCAC0005-01)
The Tork Craft TCAC0005-01 pilot pin is designed for use with TCT annular cutters ranging from 12 to 17 mm in diameter and 55 mm cutting depth. This precision-ground pilot pin guides the cutter for perfect centering and fac..
R 110.00
Ex VAT:R 95.65
Brand: TORK CRAFT
Model: TCAC0005-02
Tork Craft Pilot Pin for TCT Cutters — 18–102 mm × 35 mm (Model TCAC0005-02)
The Tork Craft TCAC0005-02 pilot pin is designed for tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm diameter, supporting a 35 mm cutting depth. The robust 7.9 mm × 90 mm shank provides secure e..
R 105.00
Ex VAT:R 91.30
Brand: TORK CRAFT
Model: TCAC0005-03
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 35 mm (Model TCAC0005-03)
The Tork Craft TCAC0005-03 pilot pin is engineered for use with TCT (tungsten carbide tipped) annular cutters sized 12 mm to 17 mm diameter and 35 mm cutting depth. The strong 6.3 mm × 90 mm shank ensures compatibility with..
R 73.00
Ex VAT:R 63.48
Brand: TORK CRAFT
Model: TCAC0005-04
Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04)
The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm
up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank e..
R 102.00
Ex VAT:R 88.70
Brand: TORK CRAFT
Model: TCAC012-1
Tork Craft Annular Hole Cutter — TCT, 12 × 30 mm, Weldon Shank 19.05 mm (Model TCAC012-1)
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome. ..
R 374.00
Ex VAT:R 325.22
Brand: TORK CRAFT
Model: TCAC012-2
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 482.00
Ex VAT:R 419.13
Brand: TORK CRAFT
Model: TCAC013-1
Annular Cutters 30mm
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 365.00
Ex VAT:R 317.39
Brand: TORK CRAFT
Model: TCAC013-2
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 482.00
Ex VAT:R 419.13
