All Products
Brand: AIRCRAFT
Model: AT0005-SK08
AirCraft Air Drill Service Kit – Chuck & Key (32-34) For AT0005 (AT0005-SK08)
At a Glance: Chuck and key service kit for AirCraft AT0005 – replaces parts 32-34 to restore strong bit grip and smooth tightening.
A worn chuck turns drilling into a constant fight—bits slip, run off-centre, and tighten..
R 226.00
Ex VAT:R 196.52
Brand: AIRCRAFT
Model: AT0005-SK07
AirCraft Air Drill Service Kit – Gear Ring & Fixing Ring (28/30) For AT0005 (AT0005-SK07)
At a Glance: Gear ring and fixing ring service kit for AirCraft AT0005 – replaces parts 28 and 30 to keep the drivetrain tight, aligned, and smooth.
A ring gear that’s worn, chipped, or no longer sitting perf..
R 114.00
Ex VAT:R 99.13
Brand: AIRCRAFT
Model: AT0005-SK06
AirCraft Air Drill Service Kit – Gear & Rot. Axle (25-27) For AT0005 (AT0005-SK06)
At a Glance: Gear and rotational axle service kit for AirCraft AT0005 – replaces drive components referenced as 25-27 for smooth, efficient power transfer.
When an air drill starts sounding “gritty”, slipping under ..
R 75.00
Ex VAT:R 65.22
Brand: AIRCRAFT
Model: AT0005-SK04
AirCraft Air Drill Service Kit – Main Body Comp. (1/13-15/35) For AT0005 (AT0005-SK04)
At a Glance: Main body component service kit for AirCraft AT0005 – refreshes housing/control-related parts referenced as 1/13-15/35.
If your AirCraft AT0005 air drill has taken a few knocks, feels loose in the h..
R 309.00
Ex VAT:R 268.70
Brand: AIRCRAFT
Model: AT0005-SK01
AirCraft Air Drill Service Kit O-rings and Seals (2,3,5,7,16,24) for AT0005 (AT0005-SK01)
At a Glance: Complete O-ring and seal refresh kit for the AirCraft AT0005 air drill—targets common leak points and worn seals.
When an air drill starts losing power, free-spinning, or hissing like a kettle,..
R 45.00
Ex VAT:R 39.13
Brand: AIRCRAFT
Model: AT0005-SK09
AirCraft Air Drill Service Kit – Rotor Blade 5pc Set (20) For AT0005 (AT0005-SK09)
At a Glance: 5-piece rotor blade (vane) set for AirCraft AT0005 – replaces part 20 to bring back crisp power and smooth air-motor operation.
Rotor blades (also called vanes) are the hardworking “muscles” inside the ..
R 25.00
Ex VAT:R 21.74
Brand: AIRCRAFT
Model: AT0005-SK05
AirCraft Air Drill Service Kit – Rotor & Cyl. (18/19/21-23) For AT0005 (AT0005-SK05)
At a Glance: Rotor and cylinder service kit for AirCraft AT0005 – replaces parts 18/19/21-23 to restore smooth, consistent drill performance.
When a pneumatic drill starts losing punch, running rough, or strugglin..
R 227.00
Ex VAT:R 197.39
Brand: AIRCRAFT
Model: AT0005-SK03
AirCraft Air Drill Service Kit Trigger Comp. (4,6,8,9,10-12) for AT0005 (AT0005-SK03)
At a Glance: Trigger component service kit for the AirCraft AT0005 air drill—ideal for fixing sticky triggers, inconsistent throttle response or air leakage around the trigger/valve area.
When an air drill star..
R 67.00
Ex VAT:R 58.26
Brand: AIRCRAFT
Model: SG AD01
Air Duster/Blow Gun
Air Inlet: 1/4"M BSP
Standard nozzle: Ø2.0mm
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They work by utilizing compressed air to create a forceful ..
R 103.00
Ex VAT:R 89.57
Brand: AIRCRAFT
Model: SG AD02
Air Duster/Blow GunLong Nozzle
Air Inlet: 1/4"M BSP
Standard nozzle: Ø2.0mm
Additional nozzle: 95mm x 4.0mm diameter
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They ..
R 120.00
Ex VAT:R 104.35
Brand: AIRCRAFT
Model: SG AD04
Air Duster/Blow GunLong Nozzle
Air Inlet: 1/4"M BSP
Nozzle diameter: 4.0mm
Nozzle length: 260mm
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They work by utilizing com..
R 144.00
Ex VAT:R 125.22
