Special Offers
-43 %
Brand: TORK CRAFT
Model: AB03400
TorkCraft - Auger Bit
Diameter: 3 mm
Length: 400 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it 'shaves' itself through the wo..
R 51.75 R 90.00
Ex VAT:R 45.00
-40 %
Brand: TORK CRAFT
Model: ALC001
Aluminium case set of 3
Aluminium case to store fragile valuables.
LARGE: 455mm x 330mm x 152mm
MEDIUM: 425mm x 285mm x120mm
SMALL: 395mm x 240mm x 90mm
MATERIAL: Aluminium
FOAM: Lined on the inside
Application:
Storage for sensitive or fragile valuables. Ideal for delicate laborat..
R 1,723.28 R 2,874.00
Ex VAT:R 1,498.50
-35 %
Brand: TORK CRAFT
Model: ALC003
Aluminium case
Aluminium case to store fragile valuables.
SIZE: 455mm x 330mm x 152mm
MATERIAL: Aluminium
FOAM: Yes
Application:
Storage for sensitive or fragile valuables. Ideal for delicate laboratory
equipment, measuring instruments or camera equipment...
There are 5 partition..
R 1,188.53 R 1,835.00
Ex VAT:R 1,033.50
-51 %
Brand: ALPEN
Model: ALP30005
//Alpen KERAMO EXTREME
PORCELAIN/GRES TILE Drill Bits
Size:
&o/; 5.0 x 105 mm
Packaged: Qty 1
Range of application:
For extremely hard porcelain/gres tiles up to Mohs/Ritz hardness 9 and glass. No cooling required. Please note max. spindle speed 200 rpm. ....
R 239.78 R 491.00
Ex VAT:R 208.50
-55 %
Brand: ALPEN
Model: ALP30010
//Alpen KERAMO EXTREME
PORCELAIN/GRES TILE Drill Bits
Size:
&o/; 10.0 x 120 mm
Packaged: Qty 1
Range of application:
For extremely hard porcelain/gres tiles up to Mohs/Ritz hardness 9 and glass. No cooling required. Please note max. spindle speed 200 rpm. Not sui....
R 274.28 R 615.00
Ex VAT:R 238.50
-55 %
Brand: ALPEN
Model: ALP817008881
//Alpen SDS-PLUS
HAMMER DRILL BITS F4
Size:
&o/; 8.0 x 160/100 mm
Packaged: Qty 3
Range of application:
The SDS-+ hammer drill bit F4 with its patented 4X stepped profile and patented tip. Low wear, very long service life.
High efficiency drill bit for heavy-duty dr....
R 119.03 R 267.00
Ex VAT:R 103.50
-22 %
Brand: AIRCRAFT
Model: AT0002
Pneumatic nail gun 16 Gauge
The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber ....
R 1,638.75 R 2,089.00
Ex VAT:R 1,425.00
-23 %
Brand: AIRCRAFT
Model: AT0006
Impact wrench 1/2' Drive kit
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2' outpu..
R 1,205.78 R 1,575.00
Ex VAT:R 1,048.50
-27 %
Brand: AIRCRAFT
Model: AT0007
Die grinder kit
Professional grinder kit giving complete flexibility for most grinding and
polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the die grinder...
R 429.53 R 585.00
Ex VAT:R 373.50
-37 %
Brand: AIRCRAFT
Model: AT0009
1/3 sheet orbital sander - 95x175mm
The orbital sander, also known as a Jitterbug, makes use of 1/3 sheet
abrasives that can be securely held in place with locking clamps in the front
and back.
A dead man's throttle switch is fitted on top for safety. The sander has a
c....
R 688.28 R 1,099.00
Ex VAT:R 598.50
-34 %
Brand: AIRCRAFT
Model: AT0015
Ratchet wrench - 3/8' Drive
Professional ratchet wrench, featuring a strong single pawl ratchet with a
maximum torque of 69 Newton-metres.
The handle is ergonomically shapped with a comfortable rubber grip. The dead
man switch makes is safe to use in removing/replacing radiators, spark..
R 636.53 R 961.00
Ex VAT:R 553.50
-25 %
Brand: AIRCRAFT
Model: AT0025
Angle grinder - &O/; 180mm
Professional pneumatic angle grinder for &o/; 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic o..
R 4,138.28 R 5,536.00
Ex VAT:R 3,598.50